Hi,
Can any one let me know whether is it possible to create a collective PO for STO's created from Allocation Table. The reason I need to create a collective PO for such STO's is to make use of SLS services. I understand collective PO is for a PULL scenario and Allocation Table is for PUSH scenario, still want to try whether Collective PO can be generated.
Regards,
Selvakumar
Hello
I am completely new in all related with SAP Retail. My customer is working with SAP Ecc 6.0 and POSDM.
When they does an update for a material, that is to say at mm42 for exameple Reduce the Validity date at Basic Data tab, or update/remove the EAN-UPC number, it needs this update goes to POSDM and updated the material there too.
I think it has to have a Badi or RFC or something that we need to actívate or customize in order to make those changes.
Can someone give me a manual, link or clue how we can update or do this?
Thanks in advance
Regards
Ari
Hi,
While I try to activate the price for article's in promotion, few article price is in status "A" i.e activated but no conditions created. Where as rest articles get the status "B". conditions records created.
Can you help suggest, what is missing and what triggers the changing of the status?
Thanks,
Adarsh
Hi,
I have crated a Generic Article with its variants, which has it's own pricing. However i have created Prepack with generic article variants.
During the PO process how can i get the netprice automaticaaly for Pre pack article from variants?
I have created Prepack article and generic article using MM41 process.
Much appreciated your response.
Thanks
K
Hi ..
I created prepack article with generic article variants which has its own purchasing price. When I create Retial PO with prepack article purchase price needs to be total purchase price of its components. However which is not happening and system is asking me to enter the purchase price.
I created prepack article and generic article using mm41, what are the changes required to setup the automatic calculation of prepack purchase price from its components total.
Much appreciated your response.
Thanks
Dears,
When I'm entering a component for structure article i can't enter decimal places for the component UOM.
ex:need to enter component for sales set article as 1.5 KG.in this case system issue error message to me
Decimal places are not permitted
Message no. 00011
| How was your SAPPHIRE NOW experience? Let us know your thoughts in this brief survey so we can continuously improve the quality of service and value we bring to you. |
Since early April, I’ve been sharing about the incredible innovation, value, and ecosystem our organization is contributing to help retailers run better. Nowhere was this more evident than at SAPPHIRE NOW, where the power of SAP Retail on HANA was touted by global executives such as Bill McDermott, Jim Hagemann Snabe, and Steve Lucas.
Over at the Retail and Consumer Products booth, we demonstrated our dominance in innovation. From mobile innovations such as Merci or My Runwayto customer success stories like Charlotte Russe’s successful 12-week implementation of SAP HANA, we heard story after story of how retailers are growing like never before. Lori Mitchell-Keller, SVP and Head of Retail Global IBU, spoke eloquently on the market changes and technology innovations that are shaping a new world of real-time retail.
After wrapping up SAPPHIRE NOW in Orlando, I flew straight to New York City to attend the 35th annual American Image Awards that same night on board the USS Intrepid. Representing SAP on the American Apparel and Footwear Association’s Board of Directors, I joined my colleagues in honoring our men and women in uniform by fundraising over $1.3 million for the Wounded Warrior Project (WWP). This cause is near and dear to my heart – my brother served in the U.S. Marine Corps and I’m very proud of his service to our country.
Standing under the stars on the deck of the decommissioned Essex-class aircraft carrier, I reflected on Bill McDermott’s SAPPHIRE NOW invitation to “look at the horizon together and dream a little bit.” As a retail business enabler, how can I help my customers take on the world’s biggest opportunities?
Best-run retailers will be real-time retailers
To me, the answer is clear. As we turn the corner from SAPPHIRE NOW and head towards the 2013 SAP Retail Forum, best-run retailers are going to be real-time retailers. Over the past years, our team has been innovating the best in data management, analytic, and mobile applications to help our retail customers know and serve their customers like never before.
To bring their businesses to the next level, retailers need to start by investing in SAP HANA. From Hasso Plattner’s keynote speech to the impressive array of companies implementing the platform, SAPPHIRE NOW was de facto proof that our in-memory database strategy is world-class and here to stay. SAP HANA is the first and most crucial step towards real-time retail. Are you ready to take that step?
Hi Experts,
I got a requirement to configure SNC login for selected users without SSO being setup between SAP GUI & SAP AS ABAP.
Kindly let me know is SNC can be configured without SSO exclusively?
If not, how can the above can be configured..help me with your views.
The main reason why we are not going for SSO is we have requests coming from rfguns scanners as dialogue user requests and many users are using same laptops for logging into SAP.
Thanks,
Sri.
I have created a Display/prepack or sales set article and maintained the stock articles as components and which are replenished before (Here I am not using any variants from generic article) and maintained RP type, safety stock and forecast parameters, I created STO through WRP1 and performed goods receipt.
How the consumption and forecast values would be updated for Display or prepack articles??, because we are purchasing Display/Pre pack articles and selling only components to stores. What is the process for replenishment if I use stock articles as components for Display or prepack?
Hello,
I want to send the Assortment List to our PI system through the WDBM transaction that generates an outbound IDOC WBBDLD. I'v already did all the necesary configuration (assortment list profile, WE21, WE20, etc) and the IDOC's are created. But it seems to be a restriction for the IDOC to be sended only to a type KU partner profile. Since we have more than 20 stores (and will continue to grow) it doesn't seem feasible to create 20 or more type KU parter profiles for maintenance reason.
Is there a way to configure the Assortment List Profile to make the IDOC to be sended to a single type LS (logical system) profile that would be pointed to our PI system?
I've debugged tx. WDBM and I've found a FM WDLD_IDOC_REDUCT_STRUCTURE_GET with the following source code:
...line:81:
i_rec_edk13-mandt = sy-mandt. " 99A
i_rec_edk13-rcvprn = locnr. " 99A
i_rec_edk13-rcvprt = 'KU'. " 99A Partnerart Kunde
i_rec_edk13-mestyp = pi_mestyp. " 99A
CALL FUNCTION 'EDI_AGREE_OUT_MESSTYPE_READ' "99A
EXPORTING
rec_edk13 = i_rec_edk13
IMPORTING
rec_edd13 = i_rec_edd13
EXCEPTIONS
db_error = 1
entry_not_exist = 2
OTHERS = 3.
...
The partner type of receiver is hardcoded to 'KU'. Our server is on SAP ECC 6.0 NW 731 with component EA-RETAIL v600.
Please help.
Regards...
Hi Experts,
As I am new to SAP Retail, this question might look like one of the basic question but I am not able to find the satisfactory solution to this in the already discussed threads, so I am posting it again.
When we create article is SAP Retail, we list it by executing listing. Could you please tell me how the listing is done, how the assortments are identified and listing is done for certain site and DCs. I am very confused regarding this.
Thanks,
Harsh
Hi retail experts,
We are facing a problem with ATP check for structured articles in SAP Retail (ECC 6.0 retail 604)
Our system is customized in order to explode the BOM for Good receipt of sales sets (MARA-ATTYP = 10) in distribution centers, so the stock is managed by components in DCs (in the stores is managed by header)
We want to implement the ATP check for STO´s and Outbound deliveries, from DC´s. These documents are created for the header articles, which are the codes supplied by the vendor. We found out that the standard checks ATP only against the header ATP´s stock. This header ATP check excludes the physical stock, because the stock is at component level, and includes the in/outbound movements. Therefore, we have an inconsistency. For Instance, If you want to create a STO with 10 units of a sales set. Consider that the Sales set has 2 components with 20 units at the warehouse, for each component (suppose BOM 1:1), and a pre-existent inbound delviery with 5 units (done for the header). Suppose your check rule for STOs, considers inbound/outbound deliveries. Unfortunately the ATP check for the STO, only takes into account the previous inbound delivery (5u) and not the physical stock (20u). The available stock displayed then is 5 units, instead of 25u (20u + 5u), and you are not allowed to save your STO with 10 units, when you should, cause your avaliabilty in the warehouse would enable it.
I ve checked customizing and notes, but didn´t find a proper solution. I´m solving the issue via std functions and ABAP. But I´d like to know if anyone faced the same problem, and could help with a std solution. Any configuration or specifics user exits for STOs and Outbound deliveries to manage this scenario?
Thank you in advance!
A sales set bill-of-material (BOM) explodes in a stock transport order (STO), when the order item is entered.
The subsequent delivery contains the header article. Can this be set up to contain the items instead?
Can a solution be selected or developed in e.g. transaction VTLA > Item > Item data?
hi,
I need to know how create make to order in sap afs. Do provide with documents if you have.
Dear All
We have requirement from my Customer. The Document Currency in the Sales Order should be in Display. This means The Customer Currency and Sales Document should be same. Can you share your ideas to fulfill this requirement
Your valuable suggestions are welcome
Best Regards
Kri
Hi Gurus,
I am trying to add Article image in master data, i have activated the subscreen and able to fetch the image if i save it in the local system, but i am not able to fetch the image if i save it in the sap server or any content server location , can you please help on this?
Hi all,
i want to change MC of generial article but it's not changing through WRCR t-code . Is there any other way for generic articels and whether i have to put perents or varients for that ?
regards,
praful
Dear SAP Experts,
I am getting an error(Division by zero trapped), while creating a shipment using the tcode VT01N,
I have packed the article in outbond delivery creation(VL02N) itself,
Can you please help me in solving error?
Please suggest appropiate solution
Thanks
Regards,
Kevin Easaw
Hi Experts , What would be the main differences between the SRS and In Store MIM and when do you select one over the other
Dear Gurus,
Is it true that an Article that has an Article Category SINGLE can be changed to Sales Set?
There is a requirement from where i'm working to change some materials that they (The Master Data Team) created incorrectly.
I hope someone can clarify this to me.
Thank you.
Regards,
Ber